The split wire rope FJQ-52 split rope cut off machine FJQ-52 cutting machine, mainly from the power source (with electric pump can be manually), most of the working cylinders, rails and cut off the blade, FJQ-52 The split wire rope cutting machine has reasonable structure, easy to operate, fast cutting, effort, etc., especially due to the split structure, which basically avoid careless operation rope thrown bomb wounding phenomenon. The cutter will not only cut ￠ 32-52 mm wire rope, but also cut the following specifications ￠ 20 mm round bars. The cutter is a national initiative FJQ-52 split wire rope cutting machine is widely used in metallurgy, mining, petroleum, bridges and other engineering sectors. Cutter use FJQ-52 split wire rope: FJQ-52 split wire rope cutter, the cylinders and the oil pump with a high pressure hose connections, and the oil return bolts tightened. 2, the movable pin set aside, turn the rails, and wire rope will be cut into the slot (direct penetration), having a good activity pin. 3, the upper and lower pushed the handle, the blade forward, you can achieve the cutting action. 4, the forward movement is completed, loosen the oil return bolts, knife backhaul, ready for the next action. Parameter model cutting range blade stroke maximum cutting force of pressure FJQ-32 ￠ 8-32mm 40mm 16T 63MPa FJQ-52 ￠ 8-52mm 58mm 50T 63MPa FJQ-52 separate rope cut off, the main source of power (with electric and manual pumps may be) working cylinder, rails and cut off the blade of several major components, it has the advantages of reasonable structure, easy to operate, and cut off quickly, and effort FJQ-52 split wire rope cutter, especially due to the use of a separate structure, thus fundamentally to avoid careless operation wire rope thrown bomb wounding phenomenon. FJQ-52 split wire rope cutter and cut off not only ￠ 32-52 mm wire rope can cut specifications ￠ 20 mm round bars. The cutter is a national initiative widely used in metallurgy, mining, petroleum, bridges and other engineering departments. 30kg Road plywood hydraulic Bend Vertical the pointsman control FJQ-52 separate rope cut off the use of methods: 1, the fuel tank and oil pump with a high pressure hose connection and tighten the oil return bolts. 2, the activities of the pin pulled out, turn the rails and then will be cut wire rope into the slot (direct penetration) Shanghao activities eliminated. 3, the upper and lower tilt the handle, the blade forward to achieve cut. Type Rated pressure blade stroke cut the force FJQ-32 63MPa 40mm 16T FJQ-52 63MPa 58mm 50T 4 forward the end of work, unscrew the oil return bolts, knife backhaul ready for the next action. The FJQ-52 split wire rope cutter parameters Table: Jining City Zhuoxin Mining Equipment Co., Ltd., adhering to the bold and solid, in the Shandong Province, to visit my company invited experts, leadership, guidance, enlighten, and look forward to sincere cooperation with you. " The pursuit of excellence is always our theme, we will make every effort to create efficient strive advanced technology, excellent product quality, coal mining enterprises to provide multi-faceted services. Contact: Jiangjing Li Mobile: 15653732939 Tel 0537 -2998821 Fax :0537 2,228,358 QQ: 1,970,907,860