DYF-10 split hydraulic Rama DYF-10 Split Hydraulic Rama works hydraulic Rama is based on the hydraulic actuating lever forward movement, so the push rod itself does not rotate. The knuckle seat can be forward and back of controllable pitch, as long as the operation around the small swing handle, hydraulic start lever forward, hook corresponding to backward, pull out pulled objects directly with the thread. DYF-10 split hydraulic Rama application range of hydraulic Rama is an alternative to the the traditional Rama idealized new tools. Easy to operate, effort, without space constraints, this Rama compact structure, the use of flexible, light weight, small size, easy to carry, suitable for factories, repair sites. DYF-10 split hydraulic Rama use methods and precautions 1, DYF-10 split hydraulic Rama used first handle the slotted end set into the oil return valve stem, and back to the oil stem clockwise direction tightened. The knuckle seat adjustment to claw hook seize the pull objects. 3, hole handle insert lift hand back and forth ruffles the piston actuating lever forward steady advance, claw hook corresponding back and pulled out pulled objects. 4, the the piston actuating lever hydraulic Ramli effective distance is only 50mm when using the extended distance shall not be greater than 50mm, stop when not pulled out, loosen the oil return valve, piston starter rod retracted go second after a good tune Repeat steps 1, 2, 3 pulled out so far. 5, DYF-10 split hydraulic Rama purports starter piston rod retracted only need to handle slotted end of the oil return valve stem counterclockwise slightly loosen the piston actuating lever gradually retracting spring action. 6, prior to use should be based on the outside diameter of the pulled objects, draw length and load force, select the corresponding tonnage hydraulic puller avoid overloading of use, to avoid damage. 7, the hydraulic Rama -5 ℃ ~ 45 ℃ (GB443-84) N15 machine oil; -20 ℃ ~ -5 ℃ (GB442-64) synthesis of spindle oil. 8, DYF-10 split hydraulic Rama hydraulic devices are equipped with automatic overload unloading valve to prevent overloading cause equipment damage, when pulled objects in excess of the rated load, overload valve automatically unloading, and instead use a larger tonnage hydraulic Rama Contact: Jiangjing Li Mobile: 15653732939 Tel 0537 -2998821 Fax :0537 2,228,358 QQ: 1970907860